Commands

Operate on building-blocks. These are grouped below as block commands, face commands, edge commands, point commands, and set commands.

Building-Blocks Block commands

building-blocks block create Create a block or blocks.
building-blocks block delete Delete blocks.
building-blocks block export Export blocks.
building-blocks block group Assign or remove a group name to blocks.
building-blocks block hide Set the blocks to be hide or not.
building-blocks block id Perform an operation on a block (by ID).
building-blocks block import Import blocks from a file.
building-blocks block list Print information about blocks.
building-blocks block make-hex-only Split all triangular faces of wedge and tetrahedral blocks.
building-blocks block multiplier Set the zone multiplier coefficient for final zone generation.
building-blocks block snapon Snap a block to a geometric set.
building-blocks block transform Perform a general geometric transformation on points of blocks.

Building-Blocks Face commands

building-blocks face add-controls Add control points to faces.
building-blocks face cycle Rotate (cycle) the topology of triangular faces.
building-blocks face delete Delete faces.
building-blocks face drape Move the points of faces onto an external geometric set.
building-blocks face group Assign a group name to faces.
building-blocks face id Modify the properties of a face.
building-blocks face list Print information about faces.
building-blocks face snapon Snap a face to a geometric set.
building-blocks face transform Transform a face (via its points).

Building-Blocks Edge commands

building-blocks edge add-controls Add control points to edges.
building-blocks edge delete Delete edges.
building-blocks edge drape Move the points of edges onto an external geometric set.
building-blocks edge factor Apply a sizing factor to zones on edges.
building-blocks edge group Assign or remove a group name to edges.
building-blocks edge id Modify the properties of an edge.
building-blocks edge list Print information about edges.
building-blocks edge ratio Apply a sizing ratio to zones on edges.
building-blocks edge ratio-isolate Determine whether zone ratios or factors propagate.
building-blocks edge size Specify the number of zones on an edge.
building-blocks edge snapon Snap an edge to a geometric set.
building-blocks edge transform Transform and edge (via its points).
building-blocks edge type Specify edge curve-type.

Building-Blocks Point commands

building-blocks point delete Delete points.
building-blocks point drape Move points onto an external geometric set.
building-blocks point group Assign a group name to points.
building-blocks point list Print information about points.
building-blocks point merge Merge two points.
building-blocks point move-to Move points.
building-blocks point snapon Snap points to a geometric set.
building-blocks point transform Transform points.

Building-Blocks Set commands

building-blocks set arrest-triangle Specify how to split a wedge block.
building-blocks set auto-tolerance Set the auto-tolerance flag for geometric manipulations.
building-blocks set automatic-zone Specify a automatic zoning method.
building-blocks set break-angle Set the break angle.
building-blocks set create Create a building block set.
building-blocks set delete Delete a building block set.
building-blocks set export Export current building blocks to a file.
building-blocks set geometry Associate a geometry set with the current set.
building-blocks set import Import a building blocks set.
building-blocks set list Print information about a building blocks set.
building-blocks set select Specify the current building blocks set.
building-blocks set tolerance Set the tolerance for geometric manipulations.
building-blocks set validate-all Check the validity of blocks.