| advection-conduction |
Effective conductivity. |
| anisotropic |
Principal thermal conductivity value. |
| arrlinear |
- attraction range with default value 0. |
| ball attribute |
Set the value of ball attributes. |
| ball create |
Create a single ball with the specified attributes. |
| ball delete |
Delete balls. |
| ball distribute |
Distribute balls with overlaps. |
| ball export |
Exports balls. |
| ball extra |
Set ball extra variables. |
| ball fix |
Fix the specified ball velocities. |
| ball free |
Free the specified ball velocities. |
| ball generate |
Generate non-overlapping balls. |
| ball group |
Specify ball group names. |
| ball history |
Adds a history of a ball value. |
| ball initialize |
Modify ball attributes. |
| ball list |
List ball information. |
| ball property |
Assign ball surface properties. |
| ball results |
Modify the usage of the ball results logic. |
| ball tolerance |
Set contact detection tolerances. |
| ball trace |
Add a ball particle trace. |
| ball cfd attribute |
Set the value of ball CFD attributes. |
| ball cfd extra |
Set ball CFD extra variables. |
| ball cfd group |
Specify CFD ball group names. |
| ball cfd history |
Add a ball CFD history. |
| ball cfd initialize |
Modify ball CFD attributes. |
| ball cfd list |
List CFD ball information. |
| ball thermal attribute |
Set the value of ball thermal attributes. |
| ball thermal extra |
Set ball thermal extra variables. |
| ball thermal fix |
Fix thermal ball’s temperature. |
| ball thermal free |
Free thermal ball’s temperature. |
| ball thermal group |
Specify thermal ball group names. |
| ball thermal history |
Add a ball thermal history. |
| ball thermal initialize |
Modify ball thermal attributes. |
| ball thermal list |
List thermal ball information. |
| ball thermal property |
Assign ball thermal surface properties. |
| ball-zone create |
Identifies overlapping balls and zones (i. |
| building-blocks block create |
Create a block or blocks. |
| building-blocks block delete |
Delete blocks. |
| building-blocks block export |
Export blocks. |
| building-blocks block group |
Assign or remove a group name to blocks. |
| building-blocks block hide |
Set the blocks to be hide or not. |
| building-blocks block id |
Perform an operation on a block (by ID). |
| building-blocks block import |
Import blocks from a file. |
| building-blocks block list |
Print information about blocks. |
| building-blocks block make-hex-only |
Split all triangular faces of wedge and tetrahedral blocks. |
| building-blocks block multiplier |
Set the zone multiplier coefficient for final zone generation. |
| building-blocks block snapon |
Snap a block to a geometric set. |
| building-blocks block transform |
Perform a general geometric transformation on points of blocks. |
| building-blocks edge add-controls |
Add control points to edges. |
| building-blocks edge delete |
Delete edges. |
| building-blocks edge drape |
Move the points of edges onto an external geometric set. |
| building-blocks edge factor |
Apply a sizing factor to zones on edges. |
| building-blocks edge group |
Assign or remove a group name to edges. |
| building-blocks edge id |
Modify the properties of an edge. |
| building-blocks edge list |
Print information about edges. |
| building-blocks edge ratio |
Apply a sizing ratio to zones on edges. |
| building-blocks edge ratio-isolate |
Determine whether zone ratios or factors propagate. |
| building-blocks edge size |
Specify the number of zones on an edge. |
| building-blocks edge snapon |
Snap an edge to a geometric set. |
| building-blocks edge transform |
Transform and edge (via its points). |
| building-blocks edge type |
Specify edge curve-type. |
| building-blocks face add-controls |
Add control points to faces. |
| building-blocks face cycle |
Rotate (cycle) the topology of triangular faces. |
| building-blocks face delete |
Delete faces. |
| building-blocks face drape |
Move the points of faces onto an external geometric set. |
| building-blocks face group |
Assign a group name to faces. |
| building-blocks face id |
Modify the properties of a face. |
| building-blocks face list |
Print information about faces. |
| building-blocks face snapon |
Snap a face to a geometric set. |
| building-blocks face transform |
Transform a face (via its points). |
| building-blocks point delete |
Delete points. |
| building-blocks point drape |
Move points onto an external geometric set. |
| building-blocks point group |
Assign a group name to points. |
| building-blocks point list |
Print information about points. |
| building-blocks point merge |
Merge two points. |
| building-blocks point move-to |
Move points. |
| building-blocks point snapon |
Snap points to a geometric set. |
| building-blocks point transform |
Transform points. |
| brick assemble |
Assemble an existing brick in the model. |
| brick delete |
Delete bricks in range. |
| brick export |
Export a brick as a binary file. |
| brick import |
Import a brick from a binary file. |
| brick make |
Make a brick from the current model state. |
| building-blocks set arrest-triangle |
Specify how to split a wedge block. |
| building-blocks set auto-tolerance |
Set the auto-tolerance flag for geometric manipulations. |
| building-blocks set automatic-zone |
Specify a automatic zoning method. |
| building-blocks set break-angle |
Set the break angle. |
| building-blocks set create |
Create a building block set. |
| building-blocks set delete |
Delete a building block set. |
| building-blocks set export |
Export current building blocks to a file. |
| building-blocks set geometry |
Associate a geometry set with the current set. |
| building-blocks set import |
Import a building blocks set. |
| building-blocks set list |
Print information about a building blocks set. |
| building-blocks set select |
Specify the current building blocks set. |
| building-blocks set tolerance |
Set the tolerance for geometric manipulations. |
| building-blocks set validate-all |
Check the validity of blocks. |
| burger |
- Normal viscosity Kelvin section with default value 0. |
| burgers |
elastic bulk modulus,
K
Kelvin shear modulus,
G
K
Maxwell shear modulus,
G
M
Kelvin... |
| burgers-mohr |
bulk modulus,
K
cohesion,
c
dilation angle in degrees,
ψ
internal friction angle... |
| cap-yield |
ultimate cohesion,
. |
| cap-yield-simplified |
dimensionless bulk modulus reference value,
ultimate cohesion,
ultimate dilation angle,... |
| cfd buoyancy |
Activate/deactivate buoyancy terms. |
| cfd connect |
Establish the socket connection to the CFD proxy server. |
| cfd coupling |
Activate/deactivate
PFC
coupling. |
| cfd cycling |
Set the
PFC
cycling status. |
| cfd interval |
Specify the update interval. |
| cfd list |
List the CFD settings. |
| cfd output |
Change the coupling outputs. |
| cfd porosity |
Set the porosity calculation mode. |
| cfd read |
Read a fluid mesh or fluid property from files. |
| cfd relaxation |
Set the relaxation parameter. |
| cfd restart |
Reset the coupling time and coupling interval to the starting
state. |
| cfd slave |
Give control of
PFC
to the CFD
proxy server. |
| cfd term |
Modify terms used in drag force calculations. |
| cfd update |
Update the porosity, particle-applied force, and drag force. |
| cfd vof |
Enable/disable the volume of fluid (VOF) mode. |
| clump attribute |
Set the value of clump attributes. |
| clump create |
Create a single clump with the specified attributes. |
| clump delete |
Delete clumps and/or pebbles. |
| clump distribute |
Distribute clumps with overlaps. |
| clump export |
Exports clumps. |
| clump extra |
Set clump or pebble extra variables. |
| clump fix |
Fix the specified clump velocities. |
| clump free |
Free the specified clump velocities. |
| clump generate |
Generate non-overlapping clumps. |
| clump group |
Specify clump or pebble group names. |
| clump history |
Adds a history of a clump value. |
| clump initialize |
Modify clump attributes. |
| clump list |
List clump information. |
| clump order |
Set the rotational EOM order. |
| clump property |
Assign clump or pebble surface properties. |
| clump replicate |
Create a clump from a template. |
| clump results |
Modify the usage of the clump results logic. |
| clump rotate |
Rotate clumps. |
| clump scale |
Scale clumps. |
| clump template |
Operate on a single clump template. |
| clump tolerance |
Set contact detection tolerances. |
| clump trace |
Add a clump or pebble particle trace. |
| clump cfd attribute |
Set the value of clump CFD attributes. |
| clump cfd extra |
Set clump CFD extra variables. |
| clump cfd group |
Specify CFD clump group names. |
| clump cfd history |
Add a clump CFD history. |
| clump cfd initialize |
Modify clump CFD attributes. |
| clump cfd list |
List CFD clump information. |
| clump thermal attribute |
Set the value of thermal clump attributes. |
| clump thermal extra |
Set thermal clump or pebble extra variables. |
| clump thermal fix |
Fix thermal clump temperature. |
| clump thermal free |
Free thermal clump temperature. |
| clump thermal group |
Specify thermal clump or pebble group names. |
| clump thermal history |
Add a clump thermal history. |
| clump thermal initialize |
Modify clump thermal attributes. |
| clump thermal list |
List thermal clump information. |
| clump thermal property |
Assign thermal clump pebble surface properties. |
| contact activate |
Change the contact activate flag. |
| contact apply-group |
Apply contact group names to contacting pieces or bodies. |
| contact cmat add |
Adds a new entry to the CMAT. |
| contact cmat apply |
Apply the CMAT to existing contacts. |
| contact cmat default |
Set the default slot(s) of the CMAT. |
| contact cmat list |
Lists the CMAT. |
| contact cmat modify |
Modify an existing entry in the CMAT. |
| contact cmat proximity |
The contact detection distance is set to
fd
. |
| contact cmat remove |
Remove entries from the CMAT. |
| contact delete |
Delete contacts in specified range. |
| contact detection |
Set automatic detection of contacts (default:
true
). |
| contact extra |
Set contact extra variables. |
| contact group |
Specify contact group names. |
| contact history |
Add a contact history. |
| contact inhibit |
Inhibit contacts in specified range. |
| contact list |
List contact information. |
| contact method |
Calls a contact method. |
| contact model |
Assign contact models. |
| contact persist |
Set the contact persistence flag. |
| contact property |
Assign contact properties. |
| data label create |
Create a user-defined label at a point in space. |
| data label delete |
Delete all labels within the specified
range
. |
| data label list |
List label information. |
| data label modify |
Modify an existing label. |
| data label results |
Include label data in results files. |
| data scalar create |
Create a scalar data entry. |
| data scalar delete |
Delete scalars in the range. |
| data scalar export |
Export scalars to the file with name
s
. |
| data scalar group |
Specify scalar group names. |
| data scalar import |
Import scalars from file
s
. |
| data scalar list |
List scalar information on data in the range specified. |
| data scalar results |
Include scalar data in results files. |
| data tensor create |
Create a tensor data entry. |
| data tensor delete |
Delete tensors in the range. |
| data tensor export |
Export tensors to the file with name
s
. |
| data tensor group |
Specify tensor group names. |
| data tensor import |
Import tensors from file
s
. |
| data tensor list |
List tensor information on data in the range specified. |
| data tensor results |
Include tensor data in results files. |
| data vector create |
Create a vector. |
| data vector delete |
Delete vector data objets in the range. |
| data vector export |
Export vectors to the file with name
s
. |
| data vector group |
Specify vector group names. |
| data vector import |
Import vectors from file
s
. |
| data vector list |
List vector information. |
| data vector results |
Include vector data in results files. |
| fracture aperture |
Assign apertures to fractures. |
| fracture attribute |
Modify fracture attributes. |
| fracture cluster |
Compute fracture clusters. |
| fracture combine |
Simplify fractures. |
| fracture compute |
Compute fracture statistics. |
| fracture connectivity |
Calculate fracture connectivity with a specified structure. |
| fracture contact-model |
Assign contact models via fractures. |
| fracture copy |
Copy fractures. |
| fracture create |
Create a deterministic fracture. |
| fracture delete |
Delete fractures. |
| fracture dfn-extra |
Set DFN extra variables. |
| fracture dfn-group |
Specify DFN group names. |
| fracture export |
Export fractures to file. |
| fracture extra |
Set fracture extra variables. |
| fracture generate |
Generate fractures from a statistical description. |
| fracture group |
Specify fracture group names. |
| fracture import |
Import fractures. |
| fracture initialize |
Modify fracture attributes. |
| fracture intersections automatic-update |
Set the intersection automatic-updating state. |
| fracture intersections compute |
Compute intersections. |
| fracture intersections delete |
Delete intersections. |
| fracture intersections scanline |
Create intersections corresponding to scanline mapping. |
| fracture list |
List the fracture attributes. |
| fracture property |
Assign fracture surface properties. |
| fracture prune |
Prune isolated fractures. |
| fracture set-property |
Assign properties in objects that intersect fractures. |
| fracture template create |
Create a fracture generation template. |
| fracture template delete |
Delete fracture generation templates. |
| fracture template modify-default |
Modify the default fracture generation template. |
| fracture verify-file |
Verify a DFN file. |
| double-yield |
maximum elastic bulk modulus,
cohesion,
dilation angle,
. |
| drucker-prager |
bulk modulus,
material parameter,
material parameter,
. |
| element cfd attribute |
Set the value of element CFD attributes. |
| element cfd extra |
Set element CFD extra variables. |
| element cfd group |
Specify CFD element group names. |
| element cfd history |
Add an element CFD history. |
| element cfd initialize |
Modify element CFD attributes. |
| element cfd list |
List CFD element information. |
| extrude block create |
Create block(s). |
| extrude block delete |
Delete block(s). |
| extrude block group |
Assign/remove a group name to blocks. |
| extrude block id |
Modify a single block by ID. |
| extrude block list |
Print information about blocks. |
| extrude block multiplier |
The command only applies to regular (3- or 4-sided) blocks... |
| extrude block position |
Modify a block by position. |
| extrude edge clear |
Clear all zone size and ratio settings on edges. |
| extrude edge combine |
Combines edges into a single edge. |
| extrude edge create |
Creates an edge or a set of edges. |
| extrude edge delete |
Delete edges. |
| extrude edge group |
Assign/remove a group name to edges. |
| extrude edge id |
Modify a single edge by ID. |
| extrude edge list |
Print information about edges. |
| extrude edge ratio |
Set the ratio. |
| extrude edge ratio-isolate |
The option only applies to the edges which form regular... |
| extrude edge size |
Set the number of zones on the edge. |
| extrude mesh gradation |
Specify maximum gradation
f
> 0 for the unstructured mesher. |
| extrude mesh list |
List information about global meshing parameters. |
| extrude mesh mode |
Specify the operating mode for the unstructured mesher. |
| extrude mesh optimization |
Specify optimization level 0
≤
i
≤
10 for the... |
| extrude mesh quad-weight |
Specify weight on quadrilaterals 0
≤
f
≤
1 for... |
| extrude mesh reset |
Reset all mesh parameters to defaults. |
| extrude mesh shape-quality |
Specify value for the shape-quality 0
≤
f
≤
1... |
| extrude mesh target-size |
Specify desired zone size (target size) inside the domain,
f
... |
| extrude mesh type |
Specify the type of mesh. |
| extrude point create |
Create a point. |
| extrude point delete |
Delete points. |
| extrude point group |
Assign/remove a group name to points. |
| extrude point id |
Modify a single point by ID. |
| extrude point list |
Print information about points. |
| extrude point transform |
Transform points. |
| extrude segment add |
Adds segment(s). |
| extrude segment clear |
Clear all segment data. |
| extrude segment delete |
Delete segment(s). |
| extrude segment index |
Modify a segment by ID. |
| extrude segment list |
List the segments and their values. |
| extrude segment origin |
Set the start position of the first segment. |
| extrude set automatic-validate |
Set off/on automatic validation. |
| extrude set automatic-zone |
Set automatic zoning of the extrusion set. |
| extrude set clear |
Clear all set data (points, edges, blocks in the 2D... |
| extrude set delete |
Delete an extrude set. |
| extrude set list |
List extrude set information. |
| extrude set metadata |
Manipulate extrude set metadata. |
| extrude set select |
Set the current extrude set. |
| extrude set system |
Set the coordinate system. |
| extrude set update-polygons |
Update the internal list of closed polygons to assure that... |
| finn |
elastic bulk modulus,
cohesion,
constant,
constant,
constant,
constant,
dilation angle,... |
| fish automatic-create |
Set the
FISH
symbol automatic creation status. |
| fish boolean-convert |
Convert other types to Boolean values. |
| fish callback |
Add/remove functions to be executed in response to callback events. |
| fish create |
Create a
FISH
symbol with name
s
and value
a
. |
| fish debug |
Launch the
FISH
function
s
in debug mode. |
| fish define |
Define a new
FISH
function. |
| fish history |
Create a history of the
FISH
variable
sym
. |
| fish integer-convert |
For FORTRAN-based codes that use index types, indicates whether automatic... |
| fish list |
List
FISH
-related quantities. |
| fish results |
Set storage of
FISH
information in results files. |
| fish set |
Assign a
FISH
symbol. |
| fish trace |
Create a particle trace of the
FISH
variable
sym
. |
| flatjoint |
- area of element
. |
| fragment activate |
Activate fragment auto-computation. |
| fragment clear |
Clear fragments. |
| fragment compute |
Compute fragments. |
| fragment deactivate |
Deactivate fragment auto-computation. |
| fragment group-slot |
Assign fragment IDs to groups. |
| fragment list |
List fragment information. |
| fragment map |
Get a map of fragment tabulation. |
| fragment register |
Register contact types for fragment analysis. |
| geometry assign-groups |
This command assigns group names to objects based on their... |
| geometry copy |
Copy geometric data. |
| geometry delete |
Delete geometric sets. |
| geometry edge create |
Create an edge. |
| geometry edge delete |
Delete geometric edges. |
| geometry edge export |
Export geometry edges data. |
| geometry edge extra |
Set edge extra variables. |
| geometry edge group |
Assign the group
s
to the edges of the geometric... |
| geometry export |
Export geometry data. |
| geometry generate |
Generate objects with specified shapes. |
| geometry import |
Import geometric data. |
| geometry list |
List geometry information. |
| geometry move-to |
Move nodes. |
| geometry node create |
Create a node at the position
v
. |
| geometry node delete |
Delete geometric nodes. |
| geometry node export |
Export geometry nodes data. |
| geometry node extra |
Set node extra variables. |
| geometry node group |
Assign the group
s
to the nodes of the geometric... |
| geometry paint-extra |
“Paint” a scalar value from a zone field. |
| geometry polygon create |
Create a polygon. |
| geometry polygon delete |
Delete geometric polygons. |
| geometry polygon export |
Export geometry polygons data. |
| geometry polygon extra |
Set polygon extra variables. |
| geometry polygon group |
Assign the group
s
to the polygons of the geometric... |
| geometry refine |
Refine the triangular or quadrilateral polygons in the geometric set... |
| geometry rotate |
Rotate nodes. |
| geometry select |
Specify the current geometric set (or create a new set... |
| geometry separate |
Separate polygons into sets. |
| geometry set |
Specify the current geometric set (or create a new set... |
| geometry tessellate |
Tessellate nodes. |
| geometry translate |
Translate nodes. |
| geometry triangulate |
Triangulate planar polygons. |
| group create |
Create a group. |
| group list |
Display the global list of group names and slot names... |
| group rename |
Rename a group. |
| group slot |
Create a slot. |
| hertz |
- surface gap exponent used for the dashpot force... |
| history delete |
All history traces are deleted. |
| history export |
Write the contents of the list of histories to the... |
| history interval |
Specifies the history-sampling interval. |
| history list |
List history information. |
| history name label |
Assigns a label with the name
sl
to history
sn
. |
| history purge |
The contents of all history traces are erased, but the... |
| history results |
indicates whether history information is stored in subsequent results files. |
| hoek-brown |
bulk modulus,
Hoek-Brown parameter,
dilation angle,
, required only when... |
| hoek-brown-pac |
bulk modulus,
Hoek-Brown parameter,
Hoek-Brown parameter,
Hoek-Brown parameter,
Hoek-Brown parameter,... |
| hydration |
Material parameter of conductivity,
. |
| hydration-drucker-prager |
reference bulk modulus for
α
= 1,
K
cte
material parameter,
a
material... |
| hysteretic |
- target restitution coefficient with default value 1. |
| isotropic |
Matrix thermal conductivity. |
| linear |
- dashpot force in units force. |
| linearcbond |
- contact bond tensile strength in units force with... |
| linearpbond |
- dashpot force in units force. |
| maxwell |
bulk modulus,
K
Poisson’s ratio,
v
shear modulus,
G
Young’s modulus,
E
dynamic viscosity,... |
| measure create |
Create a measurement region. |
| measure delete |
Delete a measurement object. |
| measure dump |
Dump the cumulative size distribution data. |
| measure history |
Add a measure history. |
| measure list |
List information related to measurement regions. |
| measure modify |
Modify measurement regions. |
| model calm |
Calm the model. |
| model clean |
Clean the model. |
| model configure |
Configure an additional calculation mode. |
| model creep |
Set parameters for a creep material analysis. |
| model cycle |
Execute timesteps. |
| model deterministic |
Set the deterministic mode. |
| model display |
Set information to display during cycling. |
| model domain |
Specify the domain boundaries and conditions. |
| model dynamic |
Set parameters for a dynamic material analysis. |
| model energy |
Set the energy tracking state by process. |
| model factor-of-safety |
Set factor of safety analysis parameters. |
| model fluid |
Set parameters for a fluid flow analysis. |
| model gravity |
Set the gravity. |
| model history |
Create a history of a model quantity. |
| model largestrain |
Sets the program to use the numerical formulation for large-strain... |
| model list |
List a model related quantity. |
| model mechanical |
Set parameters for a mechanical analysis. |
| model new |
Clear model-state information. |
| model precision |
Set the listing precision. |
| model random |
Set the seed for the random-number generator. |
| model range |
Create/delete a named range. |
| model restore |
Restore program-state information. |
| model results |
Perform file operations on results files. |
| model save |
Save all model-state information. |
| model solve |
Solve to a specified limit. |
| model step |
Execute timesteps. |
| model thermal |
This command sets parameters for a thermal material analysis (only... |
| model title |
Set the model title. |
| model update-interval |
Set the number of cycles taken between updating the existing... |
| model orientation-tracking |
Set the orientation tracking state. |
| modified-cam-clay |
maximum elastic bulk modulus,
slope of elastic swelling line,
slope... |
| mohr-coulomb |
elastic bulk modulus,
cohesion,
dilation angle,
. |
| mohr-coulomb-tension |
elastic bulk modulus,
cohesion,
dilation angle,
. |
| orthotropic |
dip angle [degrees] of the plane defined by axes 1’-2’
dip... |
| plastic-hardening |
cohesion,
. |
| plot active |
This command activates or deactivates plot
s
. |
| plot background |
Specifies the background color of the plot. |
| plot clear |
removes all plot items from the plot. |
| plot copy |
The plot is copied to the plot named
sDest
. |
| plot create |
A new plot named
s
is made the current (i. |
| plot current |
The plot named
s
is made the current (i. |
| plot delete |
The plot named
s
is deleted. |
| plot export |
The contents of the plot named
s
is exported to... |
| plot item |
Create, destroy, or modify plot items associated with the plot. |
| plot legend |
set attributes of the plot legend. |
| plot load |
attempts to load one or more user-defined plot item DLLs. |
| plot movie |
controls whether this plot participates in automatic movie generation. |
| plot outline |
controls the line used to oultine the plot and the... |
| plot print-size |
the size of the bitmap used when exporting plot images... |
| plot rename |
renames the plot named
s
to
sNew
. |
| plot reset |
resets the plot settings to default values, forcing a recalculation... |
| plot show |
This is the same as the
plot current
command, but... |
| plot title |
the font and settings used to render the title at... |
| plot title-job |
the font and settings used to render the job title... |
| plot update |
if set to
off
, the plot is not automatically updated... |
| plot view |
controls the camera view of the plot. |
| power |
bulk modulus,
K
power-law constant,
A
1
power-law constant,
A
2
power-law exponent,
n
1
power-law exponent,... |
| power-mohr |
elastic bulk modulus,
K
cohesion,
c
power-law constant,
A
1
power-law constant,
A
2
dilation angle,... |
| power-ubiquitous |
elastic bulk modulus,
K
cohesion,
c
power-law constant,
A
1
power-law constant,
A
2
dilation angle,... |
| program call |
Process the specified data file(s). |
| program continue |
Resume processing after a program pause. |
| program convert |
This command is available for
PFC
only. |
| program customer-title-1 |
Set the first line of customer information. |
| program customer-title-2 |
Set the second line of customer information. |
| program directory |
Set the working directory. |
| program echo |
Set the echo state. |
| program echo-line |
Specify output to echo to the console. |
| program exit |
Close the program. |
| program floating-point-check |
Enable/disable the floating point check. |
| program list |
Print program information. |
| program load |
Load a compatible DLL. |
| program log |
Turn on/off logging. |
| program log-file |
Specify the log file by name. |
| program mail |
Compose and send email messages. |
| program notice |
Set the notice state. |
| program pagination |
Set the pagination state. |
| program pause |
Pause command processing. |
| program playback |
Play back a record file. |
| program quit |
Close the program. |
| program return |
Return program control. |
| program stop |
Close the program. |
| program system |
Send commands to DOS. |
| program threads |
Set the number of threads for calculations and plotting. |
| program undo |
Undo commands. |
| program warning |
Set the warning state. |
| project execute |
Execute the current project. |
| project list |
List project information. |
| project new |
Clear program-state information. |
| project restore |
Restores the project file name
s
. |
| project save |
Save the current project to a file. |
| project save-plugins |
Save the currently loaded plugins with the project file. |
| range |
Create a range phrase. |
| rblock attribute |
Set the value of rigid block attributes. |
| rblock construct |
Construct a set of rigid blocks. |
| rblock contact-resolution |
Set the default contact resolution behavior involving rigid blocks. |
| rblock create |
Create a single rigid block with the specified attributes. |
| rblock cut |
Cut the rigid blocks in range. |
| rblock delete |
Delete rigid blocks. |
| rblock dilate |
Change the rigid block rounding by dilation. |
| rblock distribute |
Distribute rigid blocks with overlaps. |
| rblock erode |
Change the rigid block rounding by erosion. |
| rblock export |
Exports rigid blocks. |
| rblock extra |
Set rigid block extra variables. |
| rblock fix |
Fix the specified rigid block velocities. |
| rblock free |
Free the specified rigid block velocities. |
| rblock generate |
Generate non-overlapping rigid blocks. |
| rblock group |
Specify rigid block group names. |
| rblock history |
Adds a history of a rigid block value. |
| rblock import |
Import rigid blocks. |
| rblock initialize |
Modify rigid block attributes. |
| rblock list |
List rigid block information. |
| rblock merge |
Merge rigid blocks in range. |
| rblock property |
Assign rigid block surface properties. |
| rblock replicate |
Replicate a rigid block from the template with name
s
. |
| rblock results |
Modify the usage of the rblock results logic. |
| rblock rotate |
Rotate rigid blocks. |
| rblock scale |
Scale rigid blocks. |
| rblock template |
Operate on a single rigid block template. |
| rblock tolerance |
Set contact detection tolerances. |
| rblock trace |
Add a rigid block particle trace. |
| rblock thermal attribute |
Set the value of rigid block thermal attributes. |
| rblock thermal extra |
Set rigid block thermal extra variables. |
| rblock thermal fix |
Fix thermal rigid block’s temperature. |
| rblock thermal free |
Free thermal rigid block’s temperature. |
| rblock thermal group |
Specify thermal rigid block group names. |
| rblock thermal history |
Add a rigid block thermal history. |
| rblock thermal initialize |
Modify rigid block thermal attributes. |
| rblock thermal list |
List thermal rigid block information. |
| rblock thermal property |
Assign rigid block thermal surface properties. |
| rrlinear |
- dashpot force in units force. |
| smoothjoint |
- joint dip direction in units degrees with default... |
| softbond |
- dashpot force in units force. |
| softening-ubiquitous |
elastic bulk modulus,
matrix cohesion,
=
matrix cohesion,
matrix... |
| strain-softening |
elastic bulk modulus,
cohesion,
dilation angle,
. |
| structure damping |
Set the structural element logic damping scheme. |
| structure list information |
Lists general information about structural element settings. |
| structure results |
Controls if and what values are saved from zones in... |
| structure safety-factor |
Set the safety factor. |
| structure scale-rotational-mass |
This value applies to dynamic analysis only. |
| structure beam apply |
Assign uniform applied distributed loads. |
| structure beam create |
Create a beam represented by one or more elements. |
| structure beam delete |
Delete all beam elements in the range. |
| structure beam group |
Assign all beam elements in the range to the group... |
| structure beam hide |
This commands hides or un-hides all beam elements in the... |
| structure beam history |
Samples beam responses that include force and moment carried by... |
| structure beam import |
Create beam elements from an outside source. |
| structure beam initialize |
Initializes quantities on the element. |
| structure beam list |
List information about beam elements. |
| structure beam property |
Assigns a property to elements in the range. |
| structure beam refine |
This command refines an existing element in the range by... |
| structure beam select |
This command selects or de-selects all elements in the range. |
| structure cable apply |
Applies conditions to cable elements in the range. |
| structure cable create |
Create a cable, represented by one or more elements. |
| structure cable delete |
Delete all cable elements in the range. |
| structure cable group |
Assign all cable elements in the range to the group... |
| structure cable hide |
This commands hides or un-hides all cable elements in the... |
| structure cable history |
Sample cable responses. |
| structure cable import |
Create cable elements from an outside source. |
| structure cable initialize |
Initializes quantities on the element. |
| structure cable list |
List information about cables. |
| structure cable property |
Assigns a property to elements in the range. |
| structure cable refine |
This command refines an existing element in the range by... |
| structure cable select |
This commands selects or de-selects all elements in the range. |
| structure geogrid apply |
Assign uniform applied pressure
f
to all geogrid elements in... |
| structure geogrid create |
Create a geogrid. |
| structure geogrid delete |
Delete all geogrid elements in the range. |
| structure geogrid group |
Assign all geogrid elements in the range to the group... |
| structure geogrid hide |
This commands hides or un-hides all geogrid elements in the... |
| structure geogrid history |
Sample geogrid responses. |
| structure geogrid import |
Create geogrid elements from an outside source. |
| structure geogrid initialize |
Initializes quantities on the element. |
| structure geogrid list |
List properties and response of each geogrid element in the... |
| structure geogrid property |
Assigns a property to elements in the range. |
| structure geogrid recover |
Stress-recovery for geogrid elements. |
| structure geogrid refine |
This command refines elements in the range by subdividing them... |
| structure geogrid select |
This commands selects or de-selects all elements in the range. |
| structure liner apply |
Assign uniform applied pressure
f
to all liner elements in... |
| structure liner create |
Create a liner. |
| structure liner delete |
Delete all liner elements in the range. |
| structure liner gap-factor |
Sets the gap factor used during large-strain sliding of liner... |
| structure liner group |
Assign all liner elements in the range to the group... |
| structure liner hide |
This commands hides or un-hides all liner elements in the... |
| structure liner history |
Sample liner responses. |
| structure liner import |
Create liner elements from an outside source. |
| structure liner initialize |
Initializes quantities on the element. |
| structure liner list |
List properties and responses of each liner element in the... |
| structure liner property |
Assigns a property to elements in the range. |
| structure liner recover |
Stress recovery for liner elements. |
| structure liner refine |
this command refines elements in the range by subdividing them... |
| structure liner select |
This commands selects or de-selects all elements in the range. |
| structure link attach |
Set attachment conditions for the specified link directions. |
| structure link create |
Creates new links on structure nodes in the range. |
| structure link delete |
Delete all links in the range. |
| structure link group |
Assign all links in the range to the group with... |
| structure link hide |
This commands hides or un-hides all links in the range. |
| structure link history |
Samples relative displacement or force from a single degree-of-freedom in... |
| structure link list |
List values and information about link objects in the range. |
| structure link property |
List a property of a deformable force-displacement model in the... |
| structure link select |
This commands selects or de-selects all links in the range. |
| structure link slide |
Set the large-strain sliding flag. |
| structure link tolerance-contact |
Set the tolerance used when establishing node-to-zone links. |
| structure link tolerance-node |
Set the tolerance used when establishing node-to-node links. |
| structure link tolerance-slide |
Set the tolerance used when updating node-to-zone links in response... |
| structure node apply |
Set generalized point loads for all nodes in the range. |
| structure node create |
Create a structural node at location
v
. |
| structure node damping-local |
Sets the local-damping factor to
f
for all nodes in... |
| structure node delete |
Delete all nodes in the range. |
| structure node fix |
Fix conditions for all nodes in the range, thereby preventing... |
| structure node free |
Free fixed conditions for all nodes in the range. |
| structure node group |
Assign all nodes in the range to the group with... |
| structure node hide |
This command hides or un-hides all nodes in the range. |
| structure node history |
Samples nodal responses. |
| structure node initialize |
Initialize quantities on all structure nodes in the range. |
| structure node join |
This command creates node-to-node links on all nodes in the... |
| structure node list |
Show information about structural element nodes in the range. |
| structure node select |
This commands selects or de-selects all structural nodes in the... |
| structure node system-local |
Set the orientation of the node-local system for all nodes... |
| structure pile apply |
Assign uniform applied distributed loads. |
| structure pile create |
Create a pile represented by one or more elements. |
| structure pile delete |
Delete all pile elements in the range. |
| structure pile group |
Assign all pile elements in the range to the group... |
| structure pile hide |
This commands hides or un-hides all pile elements in the... |
| structure pile history |
Sample pile responses. |
| structure pile import |
Create pile elements from an outside source. |
| structure pile initialize |
Initializes quantities on the element. |
| structure pile list |
List information about piles. |
| structure pile property |
Assign the specified property to all elements in the range. |
| structure pile refine |
this command refines an existing element in the range by... |
| structure pile select |
This command selects or de-selects all elements in the range. |
| structure shell apply |
Assign uniform applied pressure
f
to all shell elements in... |
| structure shell create |
Create a shell. |
| structure shell delete |
Delete all shell elements in the range. |
| structure shell group |
Assign all shell elements in the range to the group... |
| structure shell hide |
This command hides or un-hides all shell elements in the... |
| structure shell history |
Sample shell responses. |
| structure shell import |
Create shell elements from an outside source. |
| structure shell initialize |
Initializes quantities on the element. |
| structure shell list |
List properties and response of each shell element in the... |
| structure shell property |
Assigns a property to elements in the range. |
| structure shell recover |
Stress-recovery for shell elements. |
| structure shell refine |
This command refines elements in the range by subdividing them... |
| structure shell select |
This commands selects or de-selects all elements in the range. |
| swell |
elastic bulk modulus,
cohesion,
swelling property,
swelling property,
swelling property,... |
| table |
Determines if the contents of tables are included in any... |
| table add |
Add an entry to the end of table
s
. |
| table clear |
Remove all entries of from table
s
. |
| table delete |
Delete table
s
. |
| table export |
The contents of the specified table are output to file... |
| table import |
Read file
sfile
into table
s
. |
| table insert |
Insert an entry into table
s
, sorted by its x-value. |
| table label |
Set a label for table
s
. |
| table list |
List table information. |
| table position |
Substitute the specified (x,y) pair for the stored x- and... |
| table sort |
Cause all entries in table
s
to be sorted in... |
| trace delete |
Delete all traces. |
| trace export |
Export the contents of the list of traces to the... |
| trace interval |
Specify the step interval on which trace values will be... |
| trace list |
List trace information. |
| trace name label |
Specify the label for trace
s
. |
| trace purge |
Clear the contents of all traces while retaining the list... |
| trace results |
indicates whether trace information is stored in subsequent results files. |
| ubiquitous-anisotropic |
dip angle [degrees] of weakness plane
dip direction [degrees] of weakness... |
| ubiquitous-joint |
elastic bulk modulus,
cohesion,
dilation angle,
. |
| wall active-sides |
Specify which side(s) of facets are active. |
| wall addfacet |
Add a facet a wall. |
| wall attribute |
Set the value of wall attributes. |
| wall create |
Create a wall from vertices. |
| wall delete |
Delete walls and/or facets. |
| wall export |
Exports walls. |
| wall extra |
Set wall or facet extra variables. |
| wall generate |
Generate walls with specified shapes. |
| wall group |
Specify wall or facet group names. |
| wall history |
Adds a history of a wall value. |
| wall import |
Import a wall. |
| wall initialize |
Modify wall attributes. |
| wall list |
List wall information. |
| wall property |
Assign facet surface properties. |
| wall resolution |
Modify the contact-resolution strategy as outlined in the “
wall_faceted
” section. |
| wall results |
Modify the usage of the wall results logic. |
| wall rotate |
Rotate walls. |
| wall servo |
The
wall servo
provides the ability to control the translational... |
| wall tolerance |
Set contact detection tolerances. |
| wall velocity-conveyor |
Assign a rotational conveyor velocity to facets. |
| wall-structure create |
Wrap
FLAC3D
structural elements with
PFC
walls. |
| wall-structure full-computation |
Turn on/off full computation mode. |
| wall-structure stiffness-factor |
Set the multiplicative factor for stiffnesses to be added to... |
| wall-structure update-tolerance |
Set the tolerance for triggering structural element updates. |
| wall thermal attribute |
Set the value of thermal wall attributes. |
| wall thermal extra |
Set thermal wall or facet extra variables. |
| wall thermal group |
Specify thermal wall or facet group names. |
| wall thermal initialize |
Modify wall thermal attributes. |
| wall thermal list |
List thermal wall information. |
| wall thermal property |
Assign thermal wall facet surface properties. |
| wall-zone create |
Wrap
FLAC3D
zones with
PFC
walls. |
| wall-zone full-computation |
Turn on/off full computation mode. |
| wall-zone stiffness-factor |
Set the multiplicative factor for stiffnesses to be added to... |
| wall-zone update-tolerance |
Set the tolerance for triggering zone updates. |
| wipp |
activation energy,
Q
bulk modulus,
K
WIPP model constant,
A
WIPP model constant,... |
| wipp-drucker |
activation energy,
Q
bulk modulus,
K
material parameter,
k
ϕ
WIPP model constant,
A
WIPP... |
| wipp-salt |
activation energy,
Q
bulk modulus,
K
final, intact salt, bulk modulus,
K
f
WIPP... |
| zone apply |
Create or modify zone conditions. |
| zone apply-remove |
Remove a zone condition. |
| zone attach |
Create attached gridpoints. |
| zone cmodel |
Assign, load, or get information on a zone constitutive model. |
| zone copy |
Copy zones. |
| zone create |
The
zone. |
| zone creep |
This command sets parameters for a time-dependent creep material analysis... |
| zone delete |
Delete zones. |
| zone densify |
This command finds all zones in the range and subdivides... |
| zone dynamic |
This command sets parameters for a dynamic model (only available... |
| zone export |
Exports a grid to a file. |
| zone fluid |
This command sets parameters for a groundwater fluid flow analysis. |
| zone generate |
This set of commands generates zones based on an algorithm,... |
| zone geometry-test |
Evaluate the integrity of model zones. |
| zone geometry-tolerance |
This command defines the tolerance before an illegal geometry error... |
| zone geometry-update |
Updates associated with geometric or property changes are performed at... |
| zone group |
Add group name
s
to the zones in the range. |
| zone hide |
This commands hides or un-hides all zones in the range. |
| zone history |
Adds a history of a zone value. |
| zone import |
Import a grid from a file. |
| zone initialize |
Initialize a variable on all zones in the range. |
| zone initialize-stresses |
Initialize zone stresses based on the density of the zones... |
| zone list |
List zone data. |
| zone mechanical |
Sets parameters for a static mechanical analysis, that are specific... |
| zone nodal-mixed-discretization |
Activate or deactivate the nodal mixed discretization (nmd) feature. |
| zone property |
Make a constitutive model(s) property assignment. |
| zone property-distribution |
Modify a zone constitutive model property. |
| zone ratio |
The ratio limit for mechanical, thermal and fluid-flow calculations using... |
| zone reflect |
All zones within the given range are reflected across the... |
| zone relax |
Creates and modifies a special apply condition on the zones... |
| zone results |
Controls if and what values are saved from zones in... |
| zone select |
This commands selects or de-selects all zones in the range. |
| zone separate |
separates internal faces specified by the
range
. |
| zone split |
Splits zones in the range into multiple hexahedral zones. |
| zone thermal |
Set parameters for a thermal analysis (only available if
model... |
| zone trace |
Trace zone position and velocity. |
| zone validate |
This command is new and experimental. |
| zone water |
This command initializes pore pressures, changing the effective stresses. |
| zone face apply |
This command is used to apply boundary conditions at surface... |
| zone face apply-remove |
Remove
zone face apply
conditions, which are described in the... |
| zone face group |
Adds a group name
s
to zone faces included in... |
| zone face hide |
Hide or un-hide zone faces in the range. |
| zone face list |
List information about zone faces. |
| zone face select |
Select or deselect zone faces in the range. |
| zone face skin |
Skin the model to automatically generate face groups. |
| zone face westergaard |
Applies the Westergaard approximation for the dynamic response of water... |
| zone face westergaard-remove |
Removes any applied westergaard condition on the faces in the... |
| zone gridpoint create |
Create a single gridpoint. |
| zone gridpoint fix |
Fix a property at all gridpoints in the range. |
| zone gridpoint force-reaction |
For each gridpoint in the range, in each of the... |
| zone gridpoint free |
Free properties at gridpoints in the range. |
| zone gridpoint group |
Assign group name
s
to zone gridpoints in the range. |
| zone gridpoint initialize |
Assign or initialize values to all gridpoints in the range. |
| zone gridpoint list |
Display gridpoint information in the console. |
| zone gridpoint merge |
Attempts to merge all gridpoints in the range. |
| zone gridpoint system |
Set the local coordinate system for gridpoints within the range. |
| zone interface create |
Create nodes or elements on interface
s
. |
| zone interface effective |
The effective stress will be used in the interface calculation... |
| zone interface element |
Manage zone interface elements. |
| zone interface list |
Show summary data on interfaces. |
| zone interface node |
Configure interface nodes. |
| zone interface permeability |
Interfaces are permeable by default. |
| zone interface tolerance-contact |
Sets the maximum depth of penetration (of faces that contact... |
